BELL 206B JETRANGER III PROCEDURES

For detailed instructions on how to fly this aircraft, see the JetRanger Aircraft Information articles in the Learning Center. For suggested speeds, see the Reference page of the Kneeboard. Note that most actions can also be performed using the mouse.
 

Display/hide radio SHIFT+2
Display/hide GPS SHIFT+3
Display/hide collective SHIFT+4
Display/hide Caution annunciators SHIFT+5
Display/hide compass SHIFT+6

NOTE: In Flight Simulator, the JetRanger engine is always running.

BEFORE TAKEOFF  
   
[ ] Fuel Quantity CHECK
[ ] Engine and Transmission Instruments CHECK WITHIN LIMITS
 
[ ] Lights AS REQUIRED
[ ] Radios and Avionics SET
[ ] Throttle
 		 FULL OPEN
(press CTRL+F3 as necessary)
[ ] Power and Flight Instruments SET and CHECK
[ ] Power Turbine (N2) SET FOR 100% in flat pitch
   
TAKEOFF  
   
[ ] Collective Pitch
 		 INCREASE TO HOVER
(press F3 as necessary)
[ ] Engine Instruments CHECK
[ ] Directional Control
 		 AS REQUIRED to maintain desired heading
[ ] Cyclic Control AS REQUIRED to accelerate smoothly
[ ] Collective
 		 AS REQUIRED for desired climb rate and airspeed
   
IN-FLIGHT OPERATIONS  
   
[ ] Airspeed AS DESIRED (below 130 KIAS)
[ ] Engine Instruments CHECK
[ ] Fuel Quantity CHECK
[ ] Altimeter SET and CHECK
   
DESCENT AND LANDING  
   
[ ] Throttle
 		 FULLY OPEN
(press CTRL+F3 as necessary)
[ ] Power Turbine RPM (N2) 97-100%
[ ] Flight Path AS REQUIRED
[ ] LDG LTS Switch ON AS REQUIRED

NOTE: This aircraft's real-world checklists have been modified for use with Flight Simulator.